What to do when a commercial cleaning contract is underperforming
Step-by-step guidance for facilities and contract managers in Australia to identify underperformance in outsourced cleaning, collect evidence, run a recovery...
Share
This guide helps facilities, property and contract managers recognise underperformance in commercial cleaning contracts, collect the evidence you need, run a structured recovery process (KPIs, corrective action plan, monitoring) and make a defensible decision to remediate or terminate. It focuses on supplier management and governance in Australia. This article provides CLEANEY operational recommendations and signposts to Australian regulators and standards; it does not replace formal legal or WHS advice or detailed operational cleaning procedures.
Signs your cleaning contract is underperforming
Look for clustered indicators across operations, compliance, finance and reputation rather than isolated complaints. Patterns matter.
Operational indicators (CLEANEY examples)
Regular gaps against the scope (missed areas, skipped tasks, rushed work).
Repeat reactive call-outs for the same issues within a short period.
Poor handover between shifts (incomplete checklists, missing supplies).
Inconsistent staffing or high casual turnover affecting coverage.
Compliance and safety indicators (note: legal duties are jurisdiction- and site-specific)
Observed absence or misuse of SDS, PPE or other controls—these are operational indicators. Whether a legal breach has occurred depends on site-specific WHS obligations; consult Safe Work Australia or a WHS advisor for legal duties.
Unsafe practices creating immediate risk (e.g., wet floors without signage, unsafe ladder use). For any imminent hazard, follow your WHS incident procedures and seek specialist advice.
Non-compliance with site security or access protocols.
Financial and reputational indicators
Frequent variations or invoiced extras that lack documented approval.
Complaints from tenants, staff or customers affecting occupancy or brand perception.
Repeated performance credits or penalties without sustained improvement.
Quick triage checklist
Are issues isolated or recurring? (Recurring = higher escalation priority.)
Is there a safety or regulatory risk? (Immediate action and specialist advice may be required.)
Can the supplier demonstrate immediate corrective steps? (If not, escalate.)
Where the calendar needs to become a site-specific scope, CLEANEY’s Commercial cleaning can be assessed against the facility’s zones, access and operating hours.
Immediately necessary documentation and evidence
Timely, organised evidence is essential for effective remediation and for defending enforcement or termination decisions.
What to record
Time-stamped photographs and short videos showing the problem (include a reference object for scale where helpful).
Site inspection notes with date/time, location, task missed and observer name.
Supplier rosters, sign-in/out sheets and any daily checklists the contractor provides.
Relevant contract clauses, scope-of-works extracts and recent KPI reports.
Customer or tenant complaints and the supplier’s response history.
How to timestamp and store evidence
Use a consistent digital folder structure (site > date > issue) and back up to your organisation’s document management system.
Prefer camera metadata and digital logs over handwritten notes; add brief written context for each media file.
Keep originals and maintain a single controlled summary document for meetings and escalation.
Example template: incident log
Date/time • Location • Observer • Short description • Photo filename(s) • Supplier notified (Y/N) • Action taken • Follow-up date
First contact and structured communication with the supplier
Start with a clear, factual notification to the supplier that sets expectations for response and evidence. Keep the tone professional and solution-focused.
Initial notification template (sample wording)
Subject: Performance notice — [site] — [date]
Body: Brief factual summary of issues observed, reference to the relevant scope/KPI clause, attached evidence, required supplier response (what to include) and deadline for response. State the contract cure periods where applicable and that WHS incidents must be managed under your WHS procedures.
Operational suggestions — non-binding (CLEANEY)
Suggested acknowledgement window: 24–72 hours.
Suggested substantive response window (including proposed CAP): 5–10 working days, depending on severity. These are operational suggestions only and must be aligned to any contract cure periods and applicable legal obligations.
Required response elements from the supplier (practical checklist)
Acceptance or disagreement with the observation and a timeline for investigation.
Immediate containment actions already taken (with photos or checklists where possible).
Proposed Corrective Action Plan (CAP) showing responsibilities, milestones and verification methods.
Follow the governance sequence: detect → document → notify → CAP → monitor → escalate/close.
Corrective Action Plan (CAP) and governance
A structured CAP turns observations into measurable fixes and establishes a monitoring rhythm to judge supplier progress.
CAP template and minimum content
Issue summary and reference evidence (photos, date/time).
Brief root cause analysis.
Corrective actions: what, who (name/role), due date and measurable acceptance criteria.
Verification method: how the client will confirm completion (site check, third-party audit, photographic evidence, improved KPI readings).
Sign-off section for supplier and client with dates.
KPIs to include (illustrative categories — set thresholds contractually)
Cleanliness audit score (0–100): a site-specific audit tool should be agreed in contract. The article does not prescribe an industry standard score.
Task completion rate: measure the percentage of scheduled tasks completed per shift using agreed definitions of 'completed'.
Response time to reactive jobs: define response/attendance and resolution timeframes in the contract based on site risk.
Safety compliance: verification that required SDS, PPE and incident reports are available and current. WHS reporting timeframes are legal matters governed by WHS law and site policy; consult Safe Work Australia or WHS counsel for obligations.
Standards: where standards such as AS/NZS 3733 may be relevant, obtain the authoritative text from Standards Australia and reference applicable clauses in contract documents rather than relying on this article for compliance requirements.
Monitoring cadence — operational suggestions
While a CAP is active: suggested example — daily site checks in the first week, then weekly for the first month, then monthly until improvement stabilises. Adapt to contract terms and site risk.
Use a one-page CAP progress report covering actions completed, outstanding items, evidence links and current KPI readings.
Regulatory obligations (WHS, consumer protections under Australian Consumer Law) — these are legal duties.
CLEANEY operational recommendations (practical actions and timelines suggested for effective supplier management).
When to apply contract remedies
Apply performance credits or make-good deductions only where the contract permits and the shortfall is measurable. These are contractual remedies—check the specific contract wording and document the measurement method.
Withholding payment is a high-risk step. Only consider it if the contract expressly permits withholding sums for non-performance; otherwise seek legal advice before withholding payment.
Process for dispute resolution
Record all attempts to resolve informally; if unresolved, follow the contract's dispute resolution process (formal notice, mediation, then arbitration or court as required).
Keep communications factual and time-stamped; contract timelines control the next steps. For guidance on unfair contract terms and consumer protections, consult the ACCC.
When to appoint an independent audit or specialist
Commission an independent quality audit when KPI readings are contested or the supplier's verification is insufficient.
Engage a WHS or hazardous-chemicals specialist if safety non-compliance is suspected; refer to Safe Work Australia for WHS obligations and seek specialist advice for binding requirements.
When to consider termination or reprocurement
Termination is significant. Use a simple, non-prescriptive decision checklist to support defensible decisions. These are CLEANEY operational heuristics and not legal thresholds.
Decision checklist (operational heuristics)
Severity: Is there imminent safety or legal risk that cannot be contained? If yes, take immediate containment action and seek specialist advice.
Remediation history: Has the supplier repeatedly failed CAP milestones or failed to meet agreed KPIs after documented remediation attempts?
Independent verification: Are independent audits or objective KPI measures showing continued shortfall?
Commercial assessment: Have you compared the estimated cost and disruption of continued remediation with short-term contingency costs and reprocurement? Document assumptions and costs.
Legal considerations and notice requirements
Follow contract termination clauses strictly (notice periods, cure periods) and document each step. Seek formal legal advice before issuing termination notices, especially where disputes over breach or damages may follow. For ACCC guidance on unfair contract terms, consult the ACCC website.
Interim risk mitigation steps
Arrange short-term contingency cleaning (internal staff or another contractor) and document costs for possible recovery.
Suggested: monthly KPI reviews for the first six months after contract start or a major change, then quarterly for steady state. Adapt timing to contract and site specifics.
Include site walkthroughs, KPI dashboards and a short stakeholder feedback summary.
Governance and continuous improvement
Agree a continuous improvement register with the supplier listing minor changes that can increase quality and reduce cost over time.
Use periodic independent audits to validate internal KPI reporting.
Onboarding and handover recommendations
Run a structured handover with documented site inductions, demonstrated checklist completion and an initial joint audit to establish baseline KPI measures. See the scope guide for examples.
Document role responsibilities and escalation contacts in a concise living document accessible to both parties.
Use these snippets as a starting point and adapt to your contract and site requirements. The examples below are CLEANEY operational templates; verify availability via the publisher.
Notification sample
Subject: Performance notice — [site] — [date]. We observed: [brief list]. Please provide acknowledgement within [operational suggestion: 24–72 hours] and a CAP within [operational suggestion: X] working days addressing root cause, proposed actions, responsibilities and verification. Follow your contract's cure periods and WHS requirements for safety-related incidents. Attached: photos/logs. Regards, [name/role].
Cleanliness audit score (0–100) • Task completion % • Reactive response time • Number of repeat complaints • Safety compliance % — agree specific thresholds in contract or CAP and align to any applicable standards for your site.
Authoritative links (authorities to consult)
Safe Work Australia — WHS guidance and contractor obligations (site- and jurisdiction-specific).
ACCC — Guidance on unfair contract terms and consumer protection.
Standards Australia — Search for AS/NZS standards relevant to cleaning (e.g., AS/NZS 3733 where applicable). Obtain the full standard text from Standards Australia for authoritative requirements.
Where this page references downloadable CLEANEY templates, check availability via the publisher's page and adapt templates to your contract and legal advice.
Questions facilities teams ask
Commercial cleaning FAQs
How long should I give a supplier to fix underperformance?
Operational suggestions: 24–72 hours for acknowledgement and around 5–10 working days for a substantive CAP depending on severity. These are non-binding CLEANEY suggestions—follow your contract’s cure periods and WHS requirements where they apply.
Can I withhold payment if the cleaner is underperforming?
Only if your contract expressly permits withholding or deductions for non-performance. Withholding without contractual support risks dispute; seek legal advice before taking that step.
When should I involve a WHS specialist?
Engage a WHS specialist if you observe unsafe chemical handling, PPE failures, hazardous tasks without controls or repeated incidents. Refer to Safe Work Australia for WHS obligations and consider an immediate site inspection.
What evidence is strongest in a performance dispute?
Time-stamped photos/videos, contemporaneous inspection logs, supplier checklists/rostering records and consistent KPI reports form the strongest factual basis. Maintain originals and a clear audit trail of communications.
Where can I get the CAP and KPI templates mentioned?
Templates are CLEANEY operational resources referenced in this guide; check the publisher's templates section or contact the publisher. Adapt templates to your contract and seek legal/WHS advice where required.
Get a free estimate
Need professional cleaning?
Get a free, no-obligation quote. Fixed price, same team every visit, no lock-in contracts.